HowTo Install Redmine in Ubuntu » History » Revision 28
« Previous |
Revision 28/70
(diff)
| Next »
Dave Thomas, 2011-06-10 21:38
- Table of contents
- Ubuntu 10.04 (and 10.04.1) using Passenger
- Ubuntu 10.4 using mod_cgi
- Redmine Installation on Virtual or Normal Ubuntu < 10.04
Ubuntu 10.04 (and 10.04.1) using Passenger¶
The installation assumes that the web server and database are already in place, so you probably want to install the LAMP stack first if you don't already have it:
$ sudo tasksel install lamp-server
Also, the default AppArmor configuration can get in the way, so you may need to set the mysqld profile to complain:
$ sudo aa-complain /usr/sbin/mysqld
As of 10.04, Redmine is available through Ubuntu's package manager, and installation is simple:
$ sudo apt-get install redmine redmine-mysql subversion
The second package, redmine-mysql, can be replaced by either redmine-pgsql or redmine-sqlite if you want to use either of those databases.
The installation process should prompt you for all the interesting details.
Redmine will now be installed in /usr/share/redmine
and /etc/redmine
Note: The package with Ubuntu is stuck in the 0.9.x branch for now. A PPA exists that has the 1.1 branch here: https://launchpad.net/~ondrej/+archive/redmine
To install redmine using the PPA:
sudo add-apt-repository ppa:ondrej/redmine
sudo apt-get update
sudo apt-get install redmine
Note: If your server is behind a firewall, you will need to export your firewall settings before running add-apt-repository
. Otherwise, the command will hang.
Run the following
export http_proxy="http://proxy.your.server:port" and export https_proxy="http:proxy.your.server:port".
You will also need to install the Passenger apache module.
sudo apt-get install libapache2-mod-passenger
If you set your AppArmor mysqld profile to complain you ought to set it back to enforce:
$ sudo aa-enforce /usr/sbin/mysqld
Configuration¶
Symlink /usr/share/redmine/public
to your desired web-accessible location. E.g.:
$ sudo ln -s /usr/share/redmine/public /var/www/redmine
By default, passenger runs as 'nobody', so you'll need to fix that. In /etc/apache2/mods-available/passenger.conf
, add:
PassengerDefaultUser www-data
You'll also need to configure the /var/www/redmine
location in /etc/apache2/sites-available/default
by adding:
<Directory /var/www/redmine> RailsBaseURI /redmine PassengerResolveSymlinksInDocumentRoot on </Directory>
Enable passenger:
$ sudo a2enmod passenger
Restart apache2
$ sudo /etc/init.d/apache2 restart
and you should be able to access Redmine at: http://redmine.server.ip.address/redmine
If you receive a "403: Forbidden" error after setting up Redmine, the Redmine 'public' folder may have incorrect permissions set. The executable bit on the public folder must be enabled or you will receive a "403: Forbidden" error when attempting to access Redmine.
$ sudo chmod a+x /usr/share/redmine/public
Ubuntu 10.4 using mod_cgi¶
The installation assumes that the web server and database are already in place, so you probably want to install the LAMP stack first if you don't already have it:
$ sudo tasksel install lamp-server
Also, the default AppArmor configuration can get in the way, so you may need to set the mysqld profile to complain:
$ sudo aa-complain /usr/sbin/mysqld
As of 10.04, Redmine is available through Ubuntu's package manager, and installation is simple:
$ sudo apt-get install redmine redmine-mysql subversion
The second package, redmine-mysql, can be replaced by either redmine-pgsql or redmine-sqlite if you want to use either of those databases.
The installation process should prompt you for all the interesting details.
Redmine will now be installed in /usr/share/redmine
and /etc/redmine
If you set your AppArmor mysqld profile to complain you ought to set it back to enforce:
$ sudo aa-enforce /usr/sbin/mysqld
Configuration¶
Using Ubuntu Server 10.04.1, configuring Redmine via mod_cgi as described in this section does not seem to work. If you can successfully make this work, please update these instructions! Otherwise follow the instructions in the next section for installing on Ubuntu 10.04 using Passenger if mod_cgi does not work for you.
Symlink /usr/share/redmine/public
to your desired web-accessible location. E.g.:
$ sudo ln -s /usr/share/redmine/public /var/www/redmine
The other files that you need to modify/create are as follows:
/etc/redmine/default/database.yml
:
production: adapter: mysql database: redmine host: localhost username: redmine password: pa55w0rd encoding: utf8
/usr/share/redmine/public/dispatch.cgi
:
#!/usr/bin/ruby require File.dirname(__FILE__) + "/../config/environment" unless defined?(RAILS_ROOT) require "dispatcher" ADDITIONAL_LOAD_PATHS.reverse.each { |dir| $:.unshift(dir) if File.directory?(dir) } if defined?(Apache::RubyRun) Dispatcher.dispatch
/usr/share/redmine/public/.htaccess
:
RewriteEngine On RewriteBase /redmine RewriteRule ^$ index.html [QSA] RewriteRule ^([^.]+)$ $1.html [QSA] RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^(.*)$ dispatch.cgi [QSA,L]
And that's it! If these instructions didn't work for you, please expand them to include whatever is needed.
Redmine Installation on Virtual or Normal Ubuntu < 10.04¶
This page is a guide to installing Redmine on either a virtual or actual installation of the Ubuntu operating system. If you follow all instructions correctly you will have installed your Redmine server successfully in almost an hour.
Step 1: Install Ubuntu¶
If you are installing on a non-virtual Ubuntu instance, please skip this section.
Installing VirtualBox:
1.Download the latest version of Sun VirtualBox (version 3.0.10 or newer).
2.Install VirtualBox by following the instructions.
Installing Ubuntu on VirtualBox:
1.Download the latest version of Ubuntu (version 9.10 or newer).
2.After installing VirtualBox you will create a new virtual operating which will be Linux type and Ubuntu subtype. If you don't know anything about VirtualBox and/or its usage please refer to Google.
3.While installing Ubuntu you should enter the following configuration:
(This suggested configuration is optional, you can enter any names you want.)
Q: What is your name? A: Redmine Server
Q: What name do you want to use to login? A: redmine
Q: Choose to password to keep your account safe? A: redmine
Q: What is the name of this computer? A: redmine-server
Choose “Log in automatically.” radio button.
4.When you've finished the installation, open up your new VirtualBox Ubuntu OS and open up a terminal (console) screen and issue these commands:
sudo apt-get update
sudo apt-get upgrade
Configuring VirtualBox:
1.If you want to reach your VirtualBox Ubuntu OS from a different machine, you have to configure VirtualBox Ubuntu OS's network settings to Bridged Adapter. So you can reach your VirtualBox Ubuntu from an internal IP address easily. Because it get's the same IP block as you from DHCP easily. I mean your guest and host computer is same IP block as different network client.
2.If you had assigned a static IP to your Network Consult by giving your static ethernet MAC address, you have to assign the unique MAC address your VirtualBox Ubuntu OS by Setting->Network->MAC address initialization box. By this MAC address, you can get a static IP easily or you can configure your Ubuntu system to not use DHCP, instead of that you can assign a static IP manually.
Step 2: Install Redmine¶
Once you have a functioning Ubuntu operating system up and running, you can continue with installing Redmine.
Install dependencies¶
The following packages are required to install and run Redmine. Please install them by running apt-get
as root:
wheresudo apt-get install package-name
package-name
is each of:
- apache2
- apache2-threaded-dev
- build-essential
- libapache-dbi-perl
- libapache2-mod-perl2
- libapache2-svn
- libdigest-sha1-perl
- libgemplugin-ruby
- libgemplugin-ruby1.8
- libruby-extras
- libruby1.8-extras
- mongrel
- mysql-server
- rails
- rake
- ruby
- rubygems
- rubygems1.8
- ruby1.8-dev
- subversion
(Could someone please clean up this list?)
Package Installation and Setup¶
1.Once you’ve installed the VirtualBox Ubuntu OS and updated it, you need to install a bunch of packages that we will prepare the server for the Redmine installation. So, as root, install the following packages by issuing:
sudo apt-get install
sudo apt-get install
(Surely some missing package names above?)
The packages we’re installing above are MySQL, phpMyAdmin, Rails, Ruby Gems, Mongrel and Ruby Dev environment.
During the installation of the packages, when MySQL is installed, it will prompt you to create a password. Make sure you remember it. You will need it later to log in to phpMyAdmin. To make things simple you can set all passwords to “redmine”.
2.Create a new directory for Redmine. I put mine in /opt/redmine. And download the latest version of Redmine in to it with the wget command line downloader and extract it by issuing:
sudo mkdir /opt/redmine
sudo cd /opt/redmine
sudo wget http://rubyforge.org/frs/download.php/66633/redmine-0.8.6.tar.gz
tar -xvf redmine-0.8.6.tar.gz
Database Setup¶
1.Now it’s time to create an empty database for Redmine. As you may have noticed, we installed phpMyAdmin earlier. phpMyAdmin will come in handy now. Head over to http://localhost/phpmyadmin. You should be presented with the phpMyAdmin login screen.
Type in “root” and the MySQL “password” you created when installing MySQL.
2.First, click on “Databases” then, at the bottom of the screen, in the “Create new database” text box create a new database called “redmine” and set “Collation” to “utf8_general_ci”.
3.Now, go back to the home screen and click on:
“Privileges”
“Add a new User”
Fill out the “Login Information” boxes. Call your user “redmine”. Make sure you remember password you create here. It will be used when you set up the database connection details in Redmine.
In the “Database for user” section, check “Create database with same name and grant all privileges” and click on the “Go” button.
4.Log out of phpMyAdmin.
Redmine Database Connection Configuration¶
1.It’s time to configure the database connection. If you installed Redmine as I did above, then copy “config/database.yml.example” to “config/database.yml” and edit this file in order to configure your database settings for “production” environment. You’ll find the “database.yml.example” issuing:
sudo cd /opt/redmine/redmine-0.8.6/config
2.So now, assuming you’re in the “/opt/redmine/redmine-0.8.6/config” directory, issue:
sudo cp database.yml.example database.yml
3.Then, open the “database.yml” file, issue:
sudo gedit database.yml
… and edit it as in the example for a MySQL database below:
production:
adapter: mysql
socket: /var/run/mysqld/mysqld.sock
database: redmine
host: localhost
username: redmine
password: [password]
Then save the “database.yml” file and exit to the command prompt.
On Ubuntu the “mysql.sock” is located in /var/run/mysqld/mysqld.sock, as noted in the “config” above.
(The standard Redmine installation assumes the socket is located in “/opt/redmine/redmine-0.8.6/tmp/mysqld.sock”.)
4.Create the database structure, by running the following command under the application root directory (I mean “/opt/redmine/redmine-0.8.6”):
sudo rake db:migrate RAILS_ENV="production"
It will create the necessary tables in the redmine database you created earlier and an administrator account.
5.Insert the default configuration data in to the database, by issuing:
sudo rake redmine:load_default_data RAILS_ENV="production"
(This step is optional but highly recommended, as you can define your own configuration from scratch. It will load default roles, trackers, statuses, work flows and enumerations. While loading default data command prompt wants to given language selection by you.)
Setting up Permissions¶
1.The user who runs Redmine must have write permission on the following sub directories: “files”, “log”, “tmp” (create the last one if not present). You probably already have a “tmp” directory in /opt/redmine/redmine-0.8.6, but if you don’t, create one now by issuing:
sudo mkdir /opt/redmine/redmine-0.8.6
2.If you haven’t created a Redmine user, do it now by issuing:
sudo useradd redmine
3.Now, assuming you run Redmine with a redmine user, from your /opt/redmine/redmine-0.8.6 directory issue:
sudo chown -R redmine:redmine files log tmp
sudo chmod -R 755 files log tmp
Testing the Installation¶
1.It should all be working now. Test the installation by running the WEBrick web server issue:
sudo cd /opt/redmine/redmine-0.8.6
sudo ruby script/server -e production
Once WEBrick has started, point your browser to http://localhost:3000/. Or, if you are using a browser on a computer other than the one you installed Redmine on, point your browser to http://192.168.1.10:3000/ (if that’s the IP address you gave your Redmine server). You should now see the application welcome page.
Log in:
1.Use default administrator account to log in:
Login : admin
Password : admin
2.You can go to Admin & Settings to modify application settings.
Setting Up Static IP¶
1.An easier method for configuring a static IP address is to use your local DHCP server to assign a permanent IP to the VirtualBox OS mac address. That way you will not have to do anything inside VBS. Consult your network administrator.
2.Or you should determine the configuration parameters given below, and then you can configure your system to have a static IP address:
The desired IP address
Network mask and broadcast address
Gateway address
Your local DNS server address(es)
Assigning Host Name and Domain for VirtualBox OS¶
1.An easier method for adding your IP address - Host name pair configuration to your DNS server . Consult your network administrator.
Configuring the Passenger Apache module¶
Passenger is a module for apache2 that allows Apache to run Ruby on Rails applications. Install it thus:
$ sudo gem install passenger
Then go to the passenger apache2 module installation directory and run passenger-install-apache2-module
$ cd /var/lib/gems/1.X/gems/passenger-X.X.X/
$ sudo bin/passenger-install-apache2-module
Next, configure Apache:
In /etc/apache2/mods-available/passenger.load we will add next line
LoadModule passenger_module /var/lib/gems/1.X/gems/passenger-X.X.X/ext/apache2/mod_passenger.so
We have to edit the conf of the passenger apache2 module in /etc/apache2/mods-available/passenger.conf
PassengerRoot /var/lib/gems/1.X/gems/passenger-X.X.X
PassengerRuby /usr/bin/ruby1.X
And now we activate the module
$ sudo a2enmod passenger
Apache virtualhost for redmine web app
<VirtualHost *:80> ServerName redmine.server.com DocumentRoot /var/www/redmine/public ServerAdmin user@server.com LogLevel warn ErrorLog /var/log/apache2/redmine_error CustomLog /var/log/apache2/redmine_access combined <Directory /var/www/redmine/public> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> </VirtualHost>
subversion server config in apache
<VirtualHost *:80> ServerName svn.server.com ServerAdmin user@server.com ErrorLog /var/log/apache2/svn_error CustomLog /var/log/apache2/svn_access combined <Location /project> DAV svn SVNPath /var/lib/svn/project AuthType Basic AuthName "Trac system for Server projects" AuthUserFile "/var/lib/svn/.htpasswd" Require valid-user <LimitExcept GET PROPFIND OPTIONS REPORT> Require valid-user </LimitExcept> </Location> </Virtualhost>
Sendmail Server Configuration¶
1.Before configuring email support for Redmine, we should download the sendmail application for Ubuntu, issue:
sudo apt-get install sendmail
sudo sendmailconfig (Answer Yes to all questions which you will be asked)
2.It’s time to configure the server connection. Copy “config/email.yml.example” to “config/email.yml” and edit this file in order to configure your database settings for “production” environment. You’ll find the “email.yml.example” issue:
sudo cd /opt/redmine/redmine-0.8.6/config
3.So now, assuming you’re in the “/config” directory, issue:
sudo cp email.yml.example email.yml
4.Then, open the “email.yml” file, issue:
sudo gedit email.yml
… and edit it as in the example for sendmail configuration below:
production:
delivery_method: :sendmail
sendmail_settings:
location: /usr/sbin/sendmail
arguments: -i -t
address: smtp.example.net
port: 25
domain: example.net
authentication: :none
user_name: redmine@example.net
password: redmine
Then save “email.yml” file and exit to the command prompt.
5.It’s time to configure the “environmet.rb” configuration. Open up the “environment.rb” and change “config.action_mailer.perform_deliveries = false” to “config.action_mailer.perform_deliveries = true” then save and close the “environment.rb”.
Subversion Installation and Configuration¶
1.Before configuring Subversion support for Redmine, we should download the Subversion application for Ubuntu, issue:
sudo apt-get install subversion
2.If your Redmine can't find the “subversion” command you can help to find by issuing:
· > sudo cd /opt/redmine/redmine-0.8.6/config
· > sudo gedit environment.rb
· Add ENV['PATH'] = "#{ENV['PATH']}:/subversion/path" line in it.
· Save and close the “environment.rb”
Start Application at Boot Time¶
1.To automatically start the application on booting your server you need to modify your “crontab”, issue:
export EDITOR=gedit
crontab -e
2.Your “crontab” file will be presented. This is the list of programs that start at certain times or at boot. Add the following to the “crontab” (all on one line):
@reboot cd /opt/redmine/redmine-0.8.6 ; rm -f log/mongrel.pid ; mongrel_rails start -e production -p 3000 -d
Backup¶
1.Running backups is always a good idea. Redmine backups should include:- data (stored in your redmine database)
/usr/bin/mysqldump -u -p | gzip > /path/to/redmine/backup/db/redmine_`date +%y_%m_%d`.gz - attachments (stored in the files directory of your Redmine install)
rsync -a /path/to/redmine/files /path/to/redmine/backup/files
2.Or you can use the bash shell to automate this kind of operation, issue:
sudo cd /opt/redmine/redmine-0.8.6
sudo mkdir backup
sudo mkdir backup/db
sudo mkdir backup/files
sudo gedit backup/runRedmineBackup.bash
And after open “runRedmineBackup.bash” with gedit, write all commands below:
#!/bin/bash data=`date -I` mysqldump --user=root --password="redmine" --all-databases | gzip > db/backup-$data.sql.gz cd db ftp -i -n << EOF open ftpserver.example.net user username password bin mput backup-$data.sql.gz bye EOF
Then save the “runRedmineBackup.bash” file and exit to the command prompt. After creation of runRedmineBackup.bash you can add this bash script to run continually between specified periods. Issue:
export EDITOR=gedit
crontab -e
Add 0 0 * * 0 cd /opt/redmine/redmine-0.8.6/backup ; sh runRedmineBackup.bash commands to crontab to backup database weekly.
For this to work without any permission problems you have to change the permissions of the files to maximum, issue:
sudo chmod -R 777 backup
sudo chown -R redmine:redmine backup
That's all. Now we have completely installed Redmine on our virtual Ubuntu OS and can reach it from any machine in our network easily. Congratulations..!
Sources & contributors.¶
- Ümit Uzun 06/11/2009.
- Some of the above material comes from Macada's wiki, licenced under the GNU Free Documentation License 1.2. See Redmine in Ubuntu Jaunty 9.04 by David 'macada', last modified 2010-02-08, accessed 2010-05-26.
- Sam Wilson 2010-05-26, formatting changes.
- Allen Yeh 2010-09-08, Added apt-get install subversion into instructions for 10.04 otherwise once redmine is setup an error like this will result this error -> The entry or revision was not found in the repository.
Additional Sources¶
Updated by Dave Thomas about 13 years ago · 28 revisions