HowTo configure Redmine to mail to MS Exchange server » History » Revision 7
Revision 6 (Timothy Vonn, 2010-02-26 07:30) → Revision 7/8 (Alejandro Zurita, 2010-06-10 00:10)
h1. [[]]h1. HowTo configure Redmine to mail to MS Exchange server MS Exchange works the same way as other SMTP servers: just edit your @config/email.yml@ file with your favorite text editor. Initially, the @production@ section should look something like this: production: delivery_method: :smtp smtp_settings: address: smtp.example.net port: 25 domain: example.net authentication: :login user_name: redmine@example.net password: redmine Usually MS Exchange will not require authentication information for outgoing (SMTP) email, so you can just comment out @domain@, @authentication@, @user_name@ and @password@ lines. Then, change @address@ to point to the IP or DNS name of your Exchange server. (if using a DNS name, make sure your web server can resolve it using @ping@!) production: delivery_method: :smtp smtp_settings: address: your_exchange_server_address port: 25 #domain: example.net #authentication: :login #user_name: redmine@example.net #password: redmine You may also have to change the port, depending on your Exchange server's configuration. It should also be possible to allow outgoing email instead of just outgoing, by re-enabling the authentication and configuring the domain, username, and password correctly. However, this will require a separate email account to be created specifically for Redmine; you'll have to ask your Exchange server administrator about creating such an account.