HowTo install Redmine on CentOS 5 » History » Revision 34
Revision 33 (Nick Shel, 2012-03-05 11:22) → Revision 34/115 (Nick Shel, 2012-03-05 11:29)
h1. HowTo install Redmine on CentOS 5 or 6
{{>toc}}
h2. Assumptions Introduction
* Apache CentOS is one of the most frequently chosen Linux operating systems for Linux based production environments. There is extensive documentation available on setting up CentOS and it is arguably the best choice for deploying and running production Linux servers for organisation with all levels of in-house Linux server deployment and administration capability.
Redmine is one of the best (if not THE best) open source issue tracking and project management applications, but because it is developed using Ruby on Rails it can be rather complex to deploy for anyone not familiar with the Ruby on Rails environment.
This How-To provides detailed steps required to get Redmine up and running on a CentOS operating system using the following components:
* Apache has previously been used web server
* MySQL database management system
* Ruby on Rails
* Mod Passenger Apache module
The How-To provides detailed instructions on the installation and works quite well
explains what each step does, so that it can be easily follows by people experienced and new to the Ruby on Rails environment.
h2. Assumptions
* MySQL CentOS is up installed and running works
* Apache is installed and works
* MySQL has previously been used is installed and works quite well
* Your are logged as root
* The next steps are done successively without errors
h2. Steps to take Installation Instructions
h3. Install gem and passenger dependencies
<pre>
yum -y install zlib-devel curl-devel openssl-devel httpd-devel apr-devel apr-util-devel mysql-devel
</pre>
h3. Get Ruby
<pre>
# Create the directory where you will store the Downloads
mkdir ~/Downloads # This can be any directory.
# Change to directory where you will store the download
cd ~/Downloads # YOUR FOLDER OF CHOICE This can be any directory.
# FTP to where you will download ruby from.
# When asked to login use user/password of anonymous/anonymous
ftp ftp.ruby-lang.org
Name (ftp.ruby-lang.org:root): anonymous
Password: anonymous
ftp> cd /pub/ruby
ftp> get ruby-1.8.7.pXXX.tar.gz ruby-1.8.7-pXXX.tar.gz
ftp> quit
# You have now downloaded ruby and need to untar it
tar zxvf ruby-1.8.7.pXXX.tar.gz ruby-1.8.7-pXXX.tar.gz
# Compile ruby
cd ruby-1.8.7.pXXX ruby-1.8.7-pXXX
./configure
make
make install
# Verify ruby installation
ruby -v
which ruby
# Change back into your downloads directory
cd ..
</pre>
h3. Get Gems 1.4.2 (does not work with Gems 1.5)
<pre>
wget http://production.cf.rubygems.org/rubygems/rubygems-1.4.2.tgz
tar zxvf rubygems-1.4.2.tgz
cd rubygems-1.4.2
ruby setup.rb
gem -v
which gem
cd ..
</pre>
h3. Install Passenger (requires gcc)
<pre>
gem install passenger
passenger-install-apache2-module
</pre>
An alternate method is to install mod_passenger RPM for Apache from the following location:
http://passenger.stealthymonkeys.com/
RHEL/CentOS 5
<pre>
rpm -Uvh http://passenger.stealthymonkeys.com/rhel/5/passenger-release.noarch.rpm
yum install mod_passenger
</pre>
RHEL/CentOS 6
<pre>
rpm --import http://passenger.stealthymonkeys.com/RPM-GPG-KEY-stealthymonkeys.asc
yum install http://passenger.stealthymonkeys.com/rhel/6/passenger-release.noarch.rpm
yum install mod_passenger
</pre>
h3. Restart Apache
<pre>service httpd restart</pre>
h3. Download Redmine
Download page: http://rubyforge.org/frs/?group_id=1850
<pre>
wget http://rubyforge.org/frs/download.php/75597/redmine-1.3.0.tar.gz # GET LATEST VERSION ON RUBYFORGE
tar zxvf redmine-1.3.0.tar.gz
</pre>
h3. Copy the folder to its HTTP document root folder
<pre>cp -av redmine-1.3.0/* /var/www/redmine</pre>
h3. Configure Apache to host the documents
more information can be found here: [[HowTo configure Apache to run Redmine]]
h3. Install Bundler
<pre>gem install bundler</pre>
h3. Add the Bundler Boot and preinitializer code
For more info go to the "Bundler site":http://gembundler.com/.
h3. Create the Gemfile and register these gems in it
<pre>vi /var/www/redmine/Gemfile</pre>
<pre>
# file: /var/www/redmine/Gemfile
source "http://rubygems.org"
gem "rake", "0.8.3"
gem "rack", "1.1.0"
gem "i18n", "0.4.2"
gem "rubytree", "0.5.2", :require => "tree"
gem "RedCloth", "~>4.2.3", :require => "redcloth" # for CodeRay
gem "mysql"
gem "coderay", "~>0.9.7"
</pre>
<pre>bundle install</pre>
h3. Create the Redmine MySQL database
<pre>
yum install mysql-server
chkconfig mysqld on
service mysqld start
/usr/bin/mysql_secure_installation
</pre>
> For MySQL:
> start the mysql client (@mysql -u root -p@) and enter the following commands
> > <pre>create database redmine character set utf8;
create user 'redmine'@'localhost' identified by 'my_password';
grant all privileges on redmine.* to 'redmine'@'localhost'; </pre>
> For versions of MySQL prior to 5.0.2 - skip the 'create user' step and instead:
> > <pre> grant all privileges on redmine.* to 'redmine'@'localhost' identified by 'my_password';</pre>
h3. Configure /var/www/redmine/config/database.yml (rename database.yml.example)
h3. Set the production environment (optional)
Uncomment the following line in file redmine/config/environment.rb:
<pre>ENV['RAILS_ENV'] ||= 'production'</pre>
h3. Generate the session store
<pre>RAILS_ENV=production bundle exec rake generate_session_store</pre>
h3. Migrate the database models
<pre>RAILS_ENV=production bundle exec rake db:migrate</pre>
h3. Load default data (optional)
<pre>RAILS_ENV=production bundle exec rake redmine:load_default_data</pre>
Follow instructions.
h3. Rename dispatch CGI files in /var/www/redmine/public/
<pre>
mv dispatch.cgi.example dispatch.cgi
mv dispatch.fcgi.example dispatch.fcgi
mv dispatch.rb.example dispatch.rb
</pre>
h3. Edit .htaccess file for CGI dispatch configuration
<pre>
mv htaccess.fcgi.example .htaccess
</pre>
h3. Chown and Chmod files for read/write access for the Apache user
<pre>
cd ..
chown -R apache:apache redmine-1.x
chmod -R 755 redmine-1.x
</pre>
h3. Redmine should be fully installed now and fully usable
Enjoy!