Redmine

h1. Get Redmine on IBM Cloud

You should have an IBM Cloud account, otherwise you can "register here":http://cloud.ibm.com/registration .

At the end of the tutorial you will have a cluster with  Redmine up and running.

1. We will provision a new Kubernetes Cluster for you if, you already have one skip to step **2**

2. We will deploy  the IBM Cloud Block Storage plug-in, if already have it skip to step **3**

3. Redmine deployment

h2. Step 1 provision Kubernetes Cluster

* Click the **Catalog** button on the top 

* Select **Service** from the catalog

* Search for **Kubernetes Service** and click on it

!kubernetes-select.png!

* You are now at the Kubernetes deployment page, you need to specify some details about the cluster 

* Choose a plan **standard** or **free**, the free plan only has one worker node and no subnet, to provision a standard cluster, you will need to upgrade you account to Pay-As-You-Go 

  * To upgrade to a Pay-As-You-Go account, complete the following steps:

  * In the console, go to Manage > Account.

  * Select Account settings, and click Add credit card.

  * Enter your payment information, click Next, and submit your information

* Choose **classic** or **VPC**, read the "docs":https://cloud.ibm.com/docs/containers?topic=containers-infrastructure_providers and choose the most suitable type for yourself 

 !infra-select.png!

* Now choose your location settings, for more information please visit "Locations":https://cloud.ibm.com/docs/containers?topic=containers-regions-and-zones#zones

  * Choose **Geography** (continent)

!location-geo.png!

  * Choose **Single** or **Multizone**, in single zone your data is only kept in on datacenter, on the other hand with Multizone it is distributed to multiple zones, thus  safer in an unforeseen zone failure 

!location-avail.png!

  * Choose a **Worker Zone** if using Single zones or **Metro** if Multizone

 !location-worker.png!

    * If you wish to use Multizone please set up your account with "VRF":https://cloud.ibm.com/docs/dl?topic=dl-overview-of-virtual-routing-and-forwarding-vrf-on-ibm-cloud or "enable Vlan spanning":https://cloud.ibm.com/docs/vlans?topic=vlans-vlan-spanning#vlan-spanning

    * If at your current location selection, there is no available Virtual LAN, a new Vlan will be created for you 

* Choose a **Worker node setup** or use the preselected one, set **Worker node amount per zone**

!worker-pool.png!

* Choose **Master Service Endpoint**,  In VRF-enabled accounts, you can choose private-only to make your master accessible on the private network or via VPN tunnel. Choose public-only to make your master publicly accessible. When you have a VRF-enabled account, your cluster is set up by default to use both private and public endpoints. For more information visit "endpoints":https://cloud.ibm.com/docs/account?topic=account-service-endpoints-overview .

!endpoints.png

* Give cluster a **name**

!name-new.png!

* Give desired **tags** to your cluster, for more information visit "tags":https://cloud.ibm.com/docs/account?topic=account-tag

!tasg-new.png

* Click **create**

!create-new.png!

* Wait for you cluster to be provisioned 

!cluster-prepare.png!

* Your cluster is ready for usage 

!cluster-done.png!

h2. Step 2 deploy IBM Cloud Block Storage plug-in

The Block Storage plug-in is a persistent, high-performance iSCSI storage that you can add to your apps by using Kubernetes Persistent Volumes (PVs).

* Click the **Catalog** button on the top 

* Select **Software** from the catalog

* Search for **IBM Cloud Block Storage plug-in** and click on it

!block-search!

* On the application page Click in the dot next to the cluster, you wish to use

* Click on  **Enter or Select Namespace** and choose the default Namespace or use a custom one (if you get error please wait 30 minutes for the cluster to finalize)

!block-cluster.png!

* Give a **name** to this workspace 

* Click **install** and wait for the deployment

!block-storage-create.png!

h2. Step 3 deploy  Redmine

We will deploy   Redmine on our cluster 

* Click the **Catalog** button on the top 

* Select **Software** from the catalog

* Search for ** Redmine** and click on it

!search.png!

* Please select IBM Kubernetes Service

!target-select.png!

* On the application page Click in the _dot_ next to the cluster, you wish to use

!cluster-select.png!

* Click on  **Enter or Select Namespace** and choose the default Namespace or use a custom one 

!details-namespace.png!

* Give a unique **name** to workspace, which you can easily recognize

!details-name.png!

* Select which resource group you want to use, it's for access control and billing purposes. For more information please visit "resource groups":https://cloud.ibm.com/docs/account?topic=account-account_setup#bp_resourcegroups

!details-resource.png!

* Give **tags** to your  Redmine, for more information visit "tags":https://cloud.ibm.com/docs/account?topic=account-tag

!details-tags.png!

* Click on **Parameters with default values**, You can set deployment values or use the default ones

!parameters.png!

* Please set the  Redmine password in the parameters

!password.png!

* After finishing everything, **tick** the box next to the agreements and click **install**

!aggreement-create.png!

* The  Redmine workspace will start installing, wait a couple of minutes 

!in-progress.png!

* Your   Redmine workspace has been successfully deployed

!done.png!

h2. Verify  Redmine installation

* Go to "Resources":http://cloud.ibm.com/resources in your browser 

* Click on **Clusters**

* Click on your Cluster

!resource-select.png!

* Now you are at you clusters overview, here Click on **Actions** and **Web terminal** from the dropdown menu

!cluster-main.png!

* Click **install** - wait couple of minutes 

!terminal-install.jpg!

* Click on **Actions**

* Click **Web terminal** --> a terminal will open up

* **Type** in the terminal, please change NAMESPACE to the namespace you choose at the deployment setup:

 ```sh

$ kubectl get ns

```

!get-ns.png!

 ```sh

$ kubectl get pod -n NAMESPACE -o wide 

```

!get-pod.png!

 ```sh

$ kubectl get service -n NAMESPACE

```

!get-service.png!

* Running Redmine service will be visible 

* Copy the **External ip**, you can access the website on this IP

* Paste it into your browser

* Redmine welcome message will be visible

!welcome.png!

* Enter you password/username which you entered in the deployment step (default username is user)

!login.png!

* You arrived at the main Redmine page

!logged-in.png!

You have succesfully deployed  Redmine IBM Cloud!