Project

General

Profile

RedmineInstall » History » Version 324

Holger Just, 2022-12-30 20:02
Remove outdated Ubuntu troubleshooting section. It refered to Ruby 1.8 and *very* old / outdated ruby packaging practices in Debian/Ubuntu.

1 1 Jean-Philippe Lang
h1. Installing Redmine
2
3
{{>TOC}}
4 73 Liraz Siri
5 310 Go MAEDA
This is the installation documentation for Redmine 4.0 and higher. You can still read the document for older versions: "3.x":/projects/redmine/wiki/RedmineInstall/308 , "1.4.x - 2.6.x":/projects/redmine/wiki/RedmineInstall/263, "1.3.x":/projects/redmine/wiki/RedmineInstall?version=146
6 147 Jean-Philippe Lang
7 1 Jean-Philippe Lang
h2. Requirements
8
9 25 Jean-Philippe Lang
h3. Operating system
10 1 Jean-Philippe Lang
11 301 Go MAEDA
Redmine should run on most Unix, Linux, [[RedmineInstallOSX|macOS]] and [[RedmineInstall#Notes-on-Windows-installation|Windows]] systems as long as Ruby is available on this platform.  See specific installation HowTos [[HowTos|here]].
12 25 Jean-Philippe Lang
13 163 Etienne Massip
h3. Ruby interpreter
14 25 Jean-Philippe Lang
15 318 Mischa The Evil
The required Ruby versions for a given Redmine version are:
16 1 Jean-Philippe Lang
17 322 Marius BĂLTEANU
|_. Redmine version|_. Supported Ruby versions        |_. Rails version used|
18
|trunk (>= r21668) |Ruby 2.6, 2.7, 3.0, 3.1           |Rails 6.1            |
19
|5.0               |Ruby 2.5[1], 2.6, 2.7, 3.0, 3.1   |Rails 6.1            |
20
|4.2               |Ruby 2.4[1], 2.5[1], 2.6, 2.7[2]  |Rails 5.2            |
21
|4.1               |Ruby 2.3[1], 2.4[1], 2.5[1], 2.6  |Rails 5.2            |
22 1 Jean-Philippe Lang
23 320 Go MAEDA
fn1. %{color: red}Support of Ruby 2.5 and earlier has been ended by the Ruby community.% See the official announcements for details: "2.3":https://www.ruby-lang.org/en/news/2019/03/31/support-of-ruby-2-3-has-ended/, "2.4":https://www.ruby-lang.org/en/news/2020/04/05/support-of-ruby-2-4-has-ended/, "2.5":https://www.ruby-lang.org/en/news/2021/04/05/ruby-2-5-9-released/.
24 313 Go MAEDA
25 320 Go MAEDA
fn2. Redmine 4.2 does not support Ruby 2.7.0 and 2.7.1. Use Ruby 2.7.2 or higher (see #31500#note-13).
26 308 Go MAEDA
27 320 Go MAEDA
28 294 Go MAEDA
Important notices:
29 318 Mischa The Evil
30 306 Go MAEDA
* *Redmine does not support JRuby* because "activerecord-jdbc-adapter":https://github.com/jruby/activerecord-jdbc-adapter/issues/599 and "loofah":https://github.com/flavorjones/loofah/issues/88 do not support Rails 4.2 or later.
31 212 Etienne Massip
32 164 Etienne Massip
h3. Supported database back-ends
33 92 Knight Samar
34 302 Go MAEDA
* MySQL 5.5 - 5.7
35 287 Toshi MARUYAMA
36 303 Go MAEDA
 * *MySQL 5.6 or higher* and *MariaDB* have known issues (#19344, #19395, #17460).
37 289 Go MAEDA
38 1 Jean-Philippe Lang
* PostgreSQL 9.2 or higher
39
40 146 Etienne Massip
 * make sure your database datestyle is set to ISO (Postgresql default setting). You can set it using: @ALTER DATABASE "redmine_db" SET datestyle="ISO,MDY";@
41 302 Go MAEDA
42 270 Go MAEDA
* Microsoft SQL Server "2012 or higher":https://github.com/rails-sqlserver/activerecord-sqlserver-adapter/blob/v4.2.3/README.md#activerecord-sql-server-adapter-for-sql-server-2012-and-higher
43 192 Etienne Massip
44 311 Go MAEDA
 * Redmine 4.0.0 to 4.0.6 and 4.1.0 don't support SQL Server (#30285, #32737).
45 304 Go MAEDA
46 192 Etienne Massip
* SQLite 3 (not for multi-user production use!)
47 190 Etienne Massip
48 1 Jean-Philippe Lang
h3. Optional components
49
50
      * SCM binaries (eg. @svn@), for repository browsing (must be available in your PATH). See [[RedmineRepositories]] for SCM compatibility and requirements.
51 215 Etienne Massip
      * "ImageMagick":http://www.imagemagick.org/ (to enable Gantt export to PNG image and thumbnails generation).
52 309 Go MAEDA
      * "Ghostscript":https://www.ghostscript.com/ (to enable thumbnails generation for PDF attachments in Redmine 4.1 or later).
53 1 Jean-Philippe Lang
54
h2. Redmine Version
55
56
It is recommended that the majority of users install the proper point releases of redmine. Redmine currently releases a new version every 6 months, and these releases are considered very usable and stable. It is *not* recommended to install redmine from trunk, unless you are deeply familiar with Ruby on Rails and keep up with the changes - Trunk _does_ break from time-to-time.
57
58 114 Etienne Massip
h2. Installation procedure
59 35 Jean-Philippe Lang
60 165 Etienne Massip
h3. Step 1 - Redmine application
61 26 Jean-Philippe Lang
62 319 Bernhard Rohloff
Download a released package and extract it to an appropriate destination on your system.
63
As an alternative one can checkout the files directly from the version control system.
64 1 Jean-Philippe Lang
65 319 Bernhard Rohloff
Please visit the [[Download|download page]] for further information on how to download Redmine.
66 165 Etienne Massip
67 202 Jean-Philippe Lang
h3. Step 2 - Create an empty database and accompanying user
68 165 Etienne Massip
69 1 Jean-Philippe Lang
Redmine database user will be named @redmine@ hereafter but it can be changed to anything else.
70 165 Etienne Massip
71 1 Jean-Philippe Lang
h4. MySQL
72 166 Etienne Massip
73 1 Jean-Philippe Lang
<pre><code class="sql">
74 287 Toshi MARUYAMA
CREATE DATABASE redmine CHARACTER SET utf8mb4;
75
CREATE USER 'redmine'@'localhost' IDENTIFIED BY 'my_password';
76
GRANT ALL PRIVILEGES ON redmine.* TO 'redmine'@'localhost';
77
</code></pre>
78
79
For versions of MySQL "5.5.2":https://dev.mysql.com/doc/relnotes/mysql/5.5/en/news-5-5-3.html or lower - use *utf8* instead of "utf8mb4":https://dev.mysql.com/doc/refman/5.5/en/charset-unicode-utf8mb4.html
80
81
<pre><code class="sql">
82 208 Etienne Massip
CREATE DATABASE redmine CHARACTER SET utf8;
83
CREATE USER 'redmine'@'localhost' IDENTIFIED BY 'my_password';
84 1 Jean-Philippe Lang
GRANT ALL PRIVILEGES ON redmine.* TO 'redmine'@'localhost';
85
</code></pre>
86 281 Go MAEDA
87 287 Toshi MARUYAMA
For versions of MySQL "5.0.2":https://docs.oracle.com/cd/E17952_01/mysql-5.0-en/grant.html or lower - skip the 'CREATE USER' step and instead:
88 208 Etienne Massip
<pre><code class="sql">
89 287 Toshi MARUYAMA
CREATE DATABASE redmine CHARACTER SET utf8;
90 208 Etienne Massip
GRANT ALL PRIVILEGES ON redmine.* TO 'redmine'@'localhost' IDENTIFIED BY 'my_password';
91
</code></pre>
92 1 Jean-Philippe Lang
93
h4. PostgreSQL
94 166 Etienne Massip
95 205 Etienne Massip
<pre><code class="sql">
96 1 Jean-Philippe Lang
CREATE ROLE redmine LOGIN ENCRYPTED PASSWORD 'my_password' NOINHERIT VALID UNTIL 'infinity';
97
CREATE DATABASE redmine WITH ENCODING='UTF8' OWNER=redmine;
98 205 Etienne Massip
</code></pre>
99
100 296 Go MAEDA
h4. SQLite
101
102
Skip this step. A database file will be created during [[RedmineInstall#Step-6-Database-schema-objects-creation|Step 6]].
103
104 205 Etienne Massip
h4. SQL Server
105
106
The database, login and user can be created within ??SQL Server Management Studio?? with a few clicks.
107
108
If you prefer the command line option with @SQLCMD@, here's some basic example:
109 206 Etienne Massip
110
{{collapse(Show SQL,Hide SQL)
111 205 Etienne Massip
<pre><code class="sql">
112
USE [master]
113
GO
114
115
-- Very basic DB creation
116
CREATE DATABASE [REDMINE]
117 1 Jean-Philippe Lang
GO
118
119 206 Etienne Massip
-- Creation of a login with SQL Server login/password authentication and no password expiration policy
120
CREATE LOGIN [REDMINE] WITH PASSWORD=N'redminepassword', DEFAULT_DATABASE=[REDMINE], CHECK_EXPIRATION=OFF, CHECK_POLICY=OFF
121 205 Etienne Massip
GO
122
123
-- User creation using previously created login authentication
124
USE [REDMINE]
125
GO
126
CREATE USER [REDMINE] FOR LOGIN [REDMINE]
127
GO
128
-- User permissions set via roles
129 207 Etienne Massip
EXEC sp_addrolemember N'db_datareader', N'REDMINE'
130 205 Etienne Massip
GO
131 207 Etienne Massip
EXEC sp_addrolemember N'db_datawriter', N'REDMINE'
132 1 Jean-Philippe Lang
GO
133 205 Etienne Massip
</code></pre>
134 206 Etienne Massip
}}
135 166 Etienne Massip
136 202 Jean-Philippe Lang
h3. Step 3 - Database connection configuration
137 1 Jean-Philippe Lang
138 165 Etienne Massip
Copy @config/database.yml.example@ to @config/database.yml@ and edit this file in order to configure your database settings for "production" environment.
139
140 264 Go MAEDA
Example for a MySQL database (default port):
141 88 Sean Farrell
142 209 Etienne Massip
<pre><code class="yml">
143 1 Jean-Philippe Lang
production:
144
  adapter: mysql2
145
  database: redmine
146
  host: localhost
147
  username: redmine
148 295 Go MAEDA
  password: "my_password"
149 1 Jean-Philippe Lang
</code></pre>
150 209 Etienne Massip
151 1 Jean-Philippe Lang
If your server is not running on the standard port (3306), use this configuration instead:
152
153
<pre><code class="yml">
154
production:
155 264 Go MAEDA
  adapter: mysql2
156 1 Jean-Philippe Lang
  database: redmine
157
  host: localhost
158
  port: 3307
159
  username: redmine
160 295 Go MAEDA
  password: "my_password"
161 209 Etienne Massip
</code></pre>
162 1 Jean-Philippe Lang
163
Example for a PostgreSQL database (default port):
164
165 209 Etienne Massip
<pre><code class="yml">
166 1 Jean-Philippe Lang
production:
167
  adapter: postgresql
168
  database: <your_database_name>
169
  host: <postgres_host>
170
  username: <postgres_user>
171 295 Go MAEDA
  password: "<postgres_user_password>"
172 1 Jean-Philippe Lang
  encoding: utf8
173
  schema_search_path: <database_schema> (default - public)
174 296 Go MAEDA
</code></pre>
175
176
Example for a SQLite database:
177
178
<pre><code class="yml">
179
production:
180
  adapter: sqlite3
181
  database: db/redmine.sqlite3
182 209 Etienne Massip
</code></pre>
183 1 Jean-Philippe Lang
184 209 Etienne Massip
Example for a SQL Server database (default host @localhost@, default port @1433@):
185
<pre><code class="yml">
186
production:
187
  adapter: sqlserver
188
  database: redmine
189 1 Jean-Philippe Lang
  username: redmine # should match the database user name
190 209 Etienne Massip
  password: "redminepassword" # should match the login password
191 295 Go MAEDA
</code></pre>
192 209 Etienne Massip
193 202 Jean-Philippe Lang
h3. Step 4 - Dependencies installation
194
195
Redmine uses "Bundler":http://gembundler.com/ to manage gems dependencies.
196
197 310 Go MAEDA
You need to install Bundler first if you use Ruby 2.5 or earlier:
198 1 Jean-Philippe Lang
199 323 Holger Just
<pre>
200
gem install bundler
201
</pre>
202 1 Jean-Philippe Lang
203
Then you can install all the gems required by Redmine using the following command:
204
205 323 Holger Just
<pre>
206
bundle config set --local without 'development test' 
207
bundle install
208
</pre>
209 202 Jean-Philippe Lang
210
h4. Optional dependencies
211
212 310 Go MAEDA
h5. RMagick
213
214 1 Jean-Philippe Lang
RMagick is an interface between the Ruby programming language and the ImageMagick image processing library. The library is necessary for Redmine prior to 4.1.0 to export gantt charts to PNG or PDF.
215
216
If ImageMagick (6.4.9 - 6.9.10) is not installed on your system and you are installing Redmine 4.0 or earlier, you should skip the installation of the rmagick gem using:
217
218 323 Holger Just
<pre>
219
bundle config set --local without 'development test rmagick' 
220
bundle install
221
</pre>
222 202 Jean-Philippe Lang
223
If you have trouble installing @rmagick@ on Windows, refer to [[HowTo_install_rmagick_gem_on_Windows|this HowTo]].
224
225
h5. Database adapters
226
227 214 Etienne Massip
Redmine automatically installs the adapter gems required by your database configuration by reading it from the @config/database.yml@ file (eg. if you configured only a connection using the @mysql2@ adapter, then only the @mysql2@ gem will be installed).
228
229
Don't forget to re-run @bundle install --without development test ...@ after adding or removing adapters in the @config/database.yml@ file!
230 202 Jean-Philippe Lang
231
h4. Additional dependencies (@Gemfile.local@)
232
233
If you need to load gems that are not required by Redmine core (eg. Puma, fcgi), create a file named @Gemfile.local@ at the root of your redmine directory. It will be loaded automatically when running @bundle install@.
234
235
Example:
236
<pre>
237
# Gemfile.local
238
gem 'puma'
239 1 Jean-Philippe Lang
</pre>
240
241 165 Etienne Massip
h3. Step 5 - Session store secret generation
242 1 Jean-Philippe Lang
243 165 Etienne Massip
This step generates a random key used by Rails to encode cookies storing session data thus preventing their tampering.
244 151 Jean-Philippe Lang
Generating a new secret token invalidates all existing sessions after restart.
245 1 Jean-Philippe Lang
246 151 Jean-Philippe Lang
<pre>
247 234 Go MAEDA
bundle exec rake generate_secret_token
248 1 Jean-Philippe Lang
</pre>
249 90 Jiongliang Zhang
250 243 Toshi MARUYAMA
Alternatively, you can store this secret in config/secrets.yml:
251
http://guides.rubyonrails.org/upgrading_ruby_on_rails.html#config-secrets-yml
252
253 165 Etienne Massip
h3. Step 6 - Database schema objects creation
254 90 Jiongliang Zhang
255 165 Etienne Massip
Create the database structure, by running the following command under the application root directory:
256
257 271 Toshi MARUYAMA
<pre>
258 278 Toshi MARUYAMA
RAILS_ENV=production bundle exec rake db:migrate
259 271 Toshi MARUYAMA
</pre>
260
261
*Windows syntax:*
262
263
<pre>
264
set RAILS_ENV=production
265 184 Etienne Massip
bundle exec rake db:migrate
266 271 Toshi MARUYAMA
</pre>
267 184 Etienne Massip
268
It will create tables by running all migrations one by one then create the set of the permissions and the application administrator account, named @admin@.
269
270 165 Etienne Massip
h3. Step 7 - Database default data set
271 1 Jean-Philippe Lang
272 165 Etienne Massip
Insert default configuration data in database, by running the following command:
273
274 234 Go MAEDA
  RAILS_ENV=production bundle exec rake redmine:load_default_data
275 62 Vladimir L
276 171 Etienne Massip
Redmine will prompt you for the data set language that should be loaded; you can also define the @REDMINE_LANG@ environment variable before running the command to a value which will be automatically and silently picked up by the task.
277
278
E.g.:
279
280
Unices:
281
282 234 Go MAEDA
  RAILS_ENV=production REDMINE_LANG=fr bundle exec rake redmine:load_default_data
283 171 Etienne Massip
284
Windows:
285
<pre>
286
set RAILS_ENV=production
287
set REDMINE_LANG=fr
288 234 Go MAEDA
bundle exec rake redmine:load_default_data
289 171 Etienne Massip
</pre>
290 32 Jean-Philippe Lang
291 167 Etienne Massip
h3. Step 8 - File system permissions
292 32 Jean-Philippe Lang
293 165 Etienne Massip
NB: _Windows users can skip this section._
294 14 Jean-Philippe Lang
295 165 Etienne Massip
The user account running the application must have write permission on the following subdirectories:
296 1 Jean-Philippe Lang
297 165 Etienne Massip
# @files@ (storage of attachments)
298
# @log@ (application log file @production.log@)
299 167 Etienne Massip
# @tmp@ and @tmp/pdf@ (create these ones if not present, used to generate PDF documents among other things)
300 220 Jean-Baptiste Barth
# @public/plugin_assets@ (assets of plugins)
301 221 Jean-Baptiste Barth
302 167 Etienne Massip
E.g., assuming you run the application with a redmine user account:
303 165 Etienne Massip
304 1 Jean-Philippe Lang
<pre>
305 219 Jean-Baptiste Barth
mkdir -p tmp tmp/pdf public/plugin_assets
306 1 Jean-Philippe Lang
sudo chown -R redmine:redmine files log tmp public/plugin_assets
307
sudo chmod -R 755 files log tmp public/plugin_assets
308
</pre>
309
310 284 Toshi MARUYAMA
Note: If you have files in these directories (e.g. restore files from backup), make sure these files are not executable.
311
312
<pre>
313
sudo find files log tmp public/plugin_assets -type f -exec chmod -x {} +
314
</pre>
315
316 165 Etienne Massip
h3. Step 9 - Test the installation
317 151 Jean-Philippe Lang
318 244 Jan Niggemann (redmine.org team member)
Test the installation by running WEBrick web server:
319
320
<pre>
321
bundle exec rails server webrick -e production
322
</pre>
323
324 151 Jean-Philippe Lang
Once WEBrick has started, point your browser to http://localhost:3000/. You should now see the application welcome page.
325
326 165 Etienne Massip
> Note: Webrick is *not* suitable for production use, please only use webrick for testing that the installation up to this point is functional. Use one of the many other guides in this wiki to setup redmine to use either Passenger (aka @mod_rails@), FCGI or a Rack server (Unicorn, Thin, Puma, hellip;) to serve up your redmine.
327 14 Jean-Philippe Lang
328 165 Etienne Massip
h3. Step 10 - Logging into the application
329 158 Etienne Massip
330 165 Etienne Massip
Use default administrator account to log in:
331
332 1 Jean-Philippe Lang
    * login: admin
333
    * password: admin
334 14 Jean-Philippe Lang
335 165 Etienne Massip
You can go to ??Administration?? menu and choose ??Settings?? to modify most of the application settings.
336
337 130 Etienne Massip
h2. Configuration
338 1 Jean-Philippe Lang
339 185 Etienne Massip
Redmine settings are defined in a file named @config/configuration.yml@.
340 1 Jean-Philippe Lang
341 185 Etienne Massip
If you need to override default application settings, simply copy @config/configuration.yml.example@ to @config/configuration.yml@ and edit the new file; the file is well commented by itself, so you should have a look at it.
342 1 Jean-Philippe Lang
343 185 Etienne Massip
These settings may be defined per Rails environment (@production@/@development@/@test@).
344 131 Etienne Massip
345
+Important+ : don't forget to restart the application after any change.
346
347 130 Etienne Massip
h3. Email / SMTP server settings
348
349 132 Etienne Massip
Email configuration is described in a [[EmailConfiguration|dedicated page]].
350 1 Jean-Philippe Lang
351
h3. SCM settings
352
353 133 Etienne Massip
This configuration section allows you to:
354 131 Etienne Massip
* override default commands names if the SCM binaries present in the @PATH@ variable doesn't use the standard name (Windows .bat/.cmd names won't work)
355
* specify the full path to the binary
356
357 133 Etienne Massip
Examples (with Subversion):
358 131 Etienne Massip
359 133 Etienne Massip
Command name override:
360 131 Etienne Massip
361
 scm_subversion_command: "svn_replacement.exe"
362
363 133 Etienne Massip
Absolute path:
364 1 Jean-Philippe Lang
365
 scm_subversion_command: "C:\Program Files\Subversion\bin\svn.exe"
366
367
h3. Attachment storage settings
368
369 133 Etienne Massip
You can set a path where Redmine attachments will be stored which is different from the default 'files' directory of your Redmine instance using the @attachments_storage_path@ setting.
370
371
Examples:
372
373
 attachments_storage_path: /var/redmine/files
374
375
 attachments_storage_path: D:/redmine/files
376 130 Etienne Massip
377
h2. Logging configuration
378
379 101 T. Hauptman
Redmine defaults to a log level of :info, writing to the @log@ subdirectory. Depending on site usage, this can be a lot of data so to avoid the contents of the logfile growing without bound, consider rotating them, either through a system utility like @logrotate@ or via the @config/additional_environment.rb@ file.
380 21 Jean-Philippe Lang
381
To use the latter, copy @config/additional_environment.rb.example@ to @config/additional_environment.rb@ and add the following lines. Note that the new logger defaults to a high log level and hence has to be explicitly set to @info@.
382 123 Jean-Philippe Lang
<pre><code class="ruby">
383 21 Jean-Philippe Lang
#Logger.new(PATH,NUM_FILES_TO_ROTATE,FILE_SIZE)
384 162 Jean-Philippe Lang
config.logger = Logger.new('/path/to/logfile.log', 2, 1000000)
385 11 Jean-Philippe Lang
config.logger.level = Logger::INFO
386
</code></pre>
387
388
h2. Backups
389
390
Redmine backups should include:
391
* data (stored in your redmine database)
392
* attachments (stored in the @files@ directory of your Redmine install)
393
394 288 Go MAEDA
Please refer to [[RedmineBackupAndRestore|Backing up and restoring Redmine]] for more details.
395 69 Giuliano Simoncelli
396 216 Jean-Baptiste Barth
h2. Notes on Linux/Unix installation
397
398
Be sure to disable security hardenning tools during the installation process if you run into bizarre permission problems. These problems are mostly silent and can be caused by tools like extended ACLs, SELinux, or AppArmor. There tools are mostly used in big companies with a strict security policy, default Linux/Unix distributions settings shouldn't be a problem.
399
400 69 Giuliano Simoncelli
h2. Notes on Windows installation
401
402 156 Etienne Massip
There is an prebuilt installer of Ruby MRI available from http://rubyinstaller.org.
403
After installing it, select _Start Command Prompt with Ruby_ in the start menu.
404 1 Jean-Philippe Lang
405 156 Etienne Massip
+Specifying the @RAILS_ENV@ environment variable:+
406 69 Giuliano Simoncelli
407 156 Etienne Massip
When running command as described in this guide, you have to set the @RAILS_ENV@ environment variable using a separate command.
408 1 Jean-Philippe Lang
409 156 Etienne Massip
I.e. commands with the following syntaxes:
410 69 Giuliano Simoncelli
411 156 Etienne Massip
<pre>RAILS_ENV=production <any commmand></pre>
412 69 Giuliano Simoncelli
413 156 Etienne Massip
<pre><any commmand> RAILS_ENV=production</pre>
414 1 Jean-Philippe Lang
415 156 Etienne Massip
have to be turned into 2 subsequent commands:
416 69 Giuliano Simoncelli
417 156 Etienne Massip
<pre>set RAILS_ENV=production
418
<any commmand></pre>
419
420
+MySQL gem installation issue:+
421
422
You may need to manually install the mysql gem using the following command:
423
424 69 Giuliano Simoncelli
<pre>
425
gem install mysql
426
</pre>
427 1 Jean-Philippe Lang
428 156 Etienne Massip
And in some case it is required to copy the _libmysql.dll_ file in your ruby/bin directory.
429
Not all libmysql.dll are ok this seem to works http://instantrails.rubyforge.org/svn/trunk/InstantRails-win/InstantRails/mysql/bin/libmySQL.dll.
430
431 186 Jan Niggemann (redmine.org team member)
*Important note for Win7 and later*
432 283 Mischa The Evil
On Win7 and later, @localhost@ is commented out in the hosts file[5] and IPV6 is the default[6]. As the mysql2 gem does no support IPV6 addresses[7], a connection can't be established and you get the error "@Can't connect to MySQL server on 'localhost' (10061)@".
433 186 Jan Niggemann (redmine.org team member)
You can confirm this by pinging @localhost@, if ping targets "::1:" IPV6 is being used.
434
435
+Workaround:+
436
Replace @localhost@ with @127.0.0.1@ in database.yml.
437
438 283 Mischa The Evil
fn5. http://serverfault.com/questions/4689/windows-7-localhost-name-resolution-is-handled-within-dns-itself-why
439 186 Jan Niggemann (redmine.org team member)
440 283 Mischa The Evil
fn6. http://www.victor-ratajczyk.com/post/2012/02/25/mysql-fails-to-resolve-localhost-disable-ipv6-on-windows.aspx
441 186 Jan Niggemann (redmine.org team member)
442 283 Mischa The Evil
fn7. https://github.com/brianmario/mysql2/issues/279
443 80 Jean-Philippe Lang
444
h2. Alternative to manual installation
445
446
Some users may prefer to skip manual installation by using one of the [[Download#Third-party-Redmine-bundles|third-party Redmine bundles]] on the download page.