(Stephan Schuberth, 2012-03-28 02:05)
(Stephan Schuberth, 2012-03-28 02:07)
h1. Redmine on CentOS installation HOWTO
This works with CentOS versions 5 and 6 and describes how to get Redmine 1.3.2 set up.
* Apache is up and running
* Apache has previously been used and works quite well
* MySQL is up and running
* MySQL has previously been used and works quite well
* Your are logged as root
* The next steps are done successively without errors
h1. Install pre-dependencies
<pre>yum -y install zlib-devel curl-devel openssl-devel httpd-devel apr-devel apr-util-devel mysql-devel</pre>
Things after *#* are comments, and it is no use to type this stuff in ;)
<pre>cd ~/Downloads # YOUR FOLDER OF CHOICE
h3. FTP session
<pre>ftp> Anonymous # USERLOGIN
ftp> 'none', just hit Enter # NO PASSWORD
ftp> cd /pub/ruby
ftp> get ruby-1.8.7.pXXX.tar.gz # XXX is currently 358, as of 03/2012
<pre>tar zxvf ruby-1.8.7.pXXX.tar.gz</pre>
h3. Check installation
If this does not work, it is probably because there is no ruby at /usr/bin to be found.
If it works, skip directly to "Get Gems 1.4.2".
h3. Fix dependencies
(Only in case _ruby -v_ is *NOT* working)
<pre>which ruby # TO CHECK WHERE IT SHOULD BE
whereis ruby # TO CHECK WHERE IT IS INSTALLED</pre>
_which_ returns like /usr/bin/ along with other directories (where ruby is expected to be), and _whereis_ returns like /usr/local/bin/ruby (thats where ruby actually lies).
h4. Fix via adding /usr/local/bin to $PATH
(Do this with your editor of choice, if you do not like nano.)
Make the section with _pathmunge_ look alike like this:
if [ "$EUID" = "0" ]; then
pathmunge /usr/local/bin # ADDED THIS
pathmunge /usr/local/bin after # ADDED THIS
pathmunge /usr/local/sbin after
pathmunge /usr/sbin after
OR ADD THIS AT THE END OF THE FILE:
This sets the PATH for all Users beside root. For this setup you want to change the PATH for root, too:
Logout your user and login again, to make the changes work.
h4. Fix via Symlink Creation
This is not recommended, since if the ruby dependency is broken, others will likely be later on, too. Repair this by adding the folder to the $PATH variable like described before, else _gem_, _rake_, _bundle_, _passenger-install-apache2-module_ will not work either... you would have to creat symlinks for them, too.
Symlinks are created like this
<pre>ln -s /usr/local/bin/ruby /usr/bin/ruby</pre>
h4. Verify ruby to be working
<pre>which ruby # MUST RETURN PATH TO RUBY
ruby -v # MUST RETURN RUBY VERSION
Now it has to work. When changing $PATH variable, did you log out and log on again with your current user?
If this does not function properly, other things later on will also not work.
h2. RubyGems 1.4.2
*Does not work with Gems 1.5!*
<pre>tar zxvf rubygems-1.4.2.tgz</pre>
h3. Check installation
h3. Do things work? In case this does not work...
... else the cause solution is again creating a symlink, analogical like described in the same as with the ruby problem before...
h3. Regular install method
<pre>gem install passenger
The install process is interactive and you wil be told what to do. How to install missing dependencies is described exactly. JUST READ!
h3. Alternative install method
Install mod_passenger RPM for Apache from the following location:
<pre>rpm -Uvh http://passenger.stealthymonkeys.com/rhel/5/passenger-release.noarch.rpm
yum install mod_passenger</pre>
<pre>rpm --import http://passenger.stealthymonkeys.com/RPM-GPG-KEY-stealthymonkeys.asc
yum install http://passenger.stealthymonkeys.com/rhel/6/passenger-release.noarch.rpm
yum install mod_passenger</pre>
h2. Restart Apache
<pre>service httpd restart</pre>
h1. Install Redmine
<pre>wget http://rubyforge.org/frs/download.php/75910/redmine-1.3.2.tar.gz # GET LATEST VERSION ON RUBYFORGE</pre>
<pre>tar zxvf redmine-1.3.2.tar.gz</pre>
h3. Copy the folder to its HTTP document root folder
cp -av redmine-1.3.2/* /var/www/redmine</pre>
h1. Link Redmine to the Database
h2. Install MySQL DB Server
<pre>yum install mysql-server
chkconfig mysqld on
service mysqld start
h2. Create a MySQL database to use with Redmine
h3. Latest MySQL Version
> start the mysql client (@mysql -u root -p@) and enter the following commands:
> > <pre>create database redmine character set utf8;
create user 'redmine'@'localhost' identified by 'my_password';
grant all privileges on redmine.* to 'redmine'@'localhost'; </pre>
h3. For versions of MySQL prior to 5.0.2
> Skip the 'create user' step and do instead:
> > <pre> grant all privileges on redmine.* to 'redmine'@'localhost' identified by 'my_password';</pre>
Now the database is created and a user to be used with it. Also the user has the rights to work on the database that was created.
h2. Configure /var/www/redmine/config/database.yml
<pre>cp database.yml.example database.yml</pre>
TODO: describe what to change there...
h1. Rails Settings
h2. Dependency management with bundler
For more info go to the "bundler site":http://gembundler.com/.
<pre>gem install bundler</pre>
h3. Create Gemfile
You can of course use vi/vim as your editor of choice, if you know what you are doing. ;)
h3. Register gems
Put the following into the file you just opened:
<pre># file: /var/www/redmine/Gemfile
gem "rake", "0.8.3"
gem "rack", "1.1.0"
gem "i18n", "0.4.2"
gem "rubytree", "0.5.2", :require => "tree"
gem "RedCloth", "~>4.2.3", :require => "redcloth" # for CodeRay
gem "coderay", "~>0.9.7"</pre>
Save and exit the editor.
h3. Install the provided dependencies
h2. Set environment to "production"
Rails has the concept of environments to represent the stages of an application’s lifecycle: test, development, and production by default.
Specify your choice with the RAILS_ENV environment variable.
Production has less verbose logging and is a bit faster, testing and development environment are not needed anyway for your Redmine.
Uncomment the following line in file redmine/config/environment.rb:
<pre>ENV['RAILS_ENV'] ||= 'production'</pre>
h2. Generate the session store
<pre>RAILS_ENV=production bundle exec rake generate_session_store</pre>
h2. Migrate the database models
<pre>RAILS_ENV=production bundle exec rake db:migrate</pre>
h2. Load default data (optional)
<pre>RAILS_ENV=production bundle exec rake redmine:load_default_data</pre>
h2. Rename dispatch CGI files in /var/www/redmine/public/
mv dispatch.cgi.example dispatch.cgi
mv dispatch.fcgi.example dispatch.fcgi
mv dispatch.rb.example dispatch.rb
h1. Apache Settings
h2. Configure Apache to host the documents
more information can be found here: [[HowTo configure Apache to run Redmine]]
h2. Edit .htaccess file for CGI dispatch configuration
mv htaccess.fcgi.example .htaccess
h2. Fix rights for the apache user
chown -R apache:apache redmine-1.x
chmod -R 755 redmine-1.x
This should be everything.
*Redmine is now installed and usable.*