Project

General

Profile

Actions

Defect #10619

closed

When changing status before tracker, it shows improper status

Added by Tiffany C over 12 years ago. Updated over 12 years ago.

Status:
Closed
Priority:
Normal
Category:
Issues workflow
Target version:
Start date:
Due date:
% Done:

0%

Estimated time:
Resolution:
Fixed
Affected version:

Description

Hi. I found out an improper behavior when I changed the status before the tracker at the issue page.

You can reproduce this problem at this redmine.org site. On the "New issue" page, there are three trackers: Defect, Feature, and Patch, and each of trackers has two statuses: New and Resolved.

1. When you open the new issue page, "Defect" tracker and "New" status are selected.
2. Change the status to "Resolved"
3. Change the tracker to "Feature"
4. At this point, there has only "New" status, and "Resolved" is missing.
If you skip (2) and just change the tracker, there are both "New" and "Resolved".

Is there any problem somewhere on workflow? I had a similar problem on my setting. After changing the status before the tracker, it seems that Redmine passes the selected status to the tracker (not the original status stored in database); therefore, when changing the tracker, it gets the next status from workflow based on the changed status.

Thanks!

Actions #1

Updated by Jean-Philippe Lang over 12 years ago

  • Category set to Issues workflow
  • Status changed from New to Resolved
  • Assignee set to Jean-Philippe Lang
  • Target version set to 1.4.0
  • Resolution set to Fixed

You're absolutely right and it's fixed in r9378.

Actions #2

Updated by Tiffany C over 12 years ago

Thanks! I applied to my Redmine and it works fine!

Actions #3

Updated by Jean-Philippe Lang over 12 years ago

  • Status changed from Resolved to Closed

Merged, thanks for the feedback.

Actions

Also available in: Atom PDF