HowTo Install Redmine on openSUSE¶

Installation¶

The installation process can be done as described [[http://www.redmine.org/projects/redmine/wiki/RedmineInstall here]]

Startscript for openSUSE 12.2¶

/etc/init.d/redmine

#! /bin/sh
# customized for redmine 2.1. original author below
#
# Copyright (c) 2009 SQQD GmbH Lichtentanne, Germany.
#
# Author: Gerrit Beine <gerrit.beine@gmx.de>, 2009
#
# /etc/init.d/redmine
#
#   and symbolic its link
#
# /usr/sbin/rcredmine
#
# System startup script for the redmine daemon
#
### BEGIN INIT INFO
# Provides:       redmine
# Required-Start: $remote_fs $syslog $time
# Should-Start:   $network smtp
# Required-Stop:  $remote_fs $syslog
# Should-Stop:    $network smtp
# Default-Start:  2 3 5
# Default-Stop:   0 1 6
# Short-Description: Redmine Web Server
# Description:    Redmine Web Server
### END INIT INFO

REDMINE_BIN=/srv/redmine/current/script/rails
REDMINE_USER=user
REDMINE_GROUP=users
test -x $REDMINE_BIN || exit 5
PIDFILE=/var/run/redmine.pid
RCFILE=/var/log/rcredmine.out
ENVIRONMENT=production

# Shell functions sourced from /etc/rc.status:
#      rc_check         check and set local and overall rc status
#      rc_status        check and set local and overall rc status
#      rc_status -v     ditto but be verbose in local rc status
#      rc_status -v -r  ditto and clear the local rc status
#      rc_failed        set local and overall rc status to failed
#      rc_failed <num>  set local and overall rc status to <num><num>
#      rc_reset         clear local rc status (overall remains)
#      rc_exit          exit appropriate to overall rc status
. /etc/rc.status

# First reset status of this service
rc_reset

# Return values acc. to LSB for all commands but status:
# 0 - success
# 1 - generic or unspecified error
# 2 - invalid or excess argument(s)
# 3 - unimplemented feature (e.g. "reload")
# 4 - insufficient privilege
# 5 - program is not installed
# 6 - program is not configured
# 7 - program is not running
#
# Note that starting an already running service, stopping
# or restarting a not-running service as well as the restart
# with force-reload (in case signalling is not supported) are
# considered a success.

case "$1" in
    start)
    echo -n "Starting Redmine daemon" 
    ## Start daemon with startproc(8). If this fails
    ## the echo return value is set appropriate.

    # NOTE: startproc return 0, even if service is
    # already running to match LSB spec.
    startproc -t 2 -u $REDMINE_USER -g $REDMINE_GROUP /usr/bin/ruby $REDMI-NE_BIN server webrick -e $ENVIRONMENT >$RCFILE 2>&1
    ps aux --columns 200 | grep $REDMINE_BIN | grep -v grep | awk '{print $2}'> $PIDFILE

    # Remember status and be verbose
    rc_status -v
    ;;
    stop)
    echo -n "Shutting down Redmine daemon" 
    ## Stop daemon with killproc(8) and if this fails
    ## set echo the echo return value.

    killproc -INT -p $PIDFILE ruby $REDMINE_BIN >/dev/null 2>&1
    # Remember status and be verbose
    rc_status -v
    ;;
    try-restart)
    ## Stop the service and if this succeeds (i.e. the
    ## service was running before), start it again.
    ## Note: try-restart is not (yet) part of LSB (as of 0.7.5)
    $0 status >/dev/null &&  $0 restart

    # Remember status and be quiet
    rc_status
    ;;
    restart)
    ## Stop the service and regardless of whether it was
    ## running or not, start it again.
    $0 stop
    $0 start

    # Remember status and be quiet
    rc_status
    ;;
    force-reload)
    ## Signal the daemon to reload its config. Most daemons
    ## do this on signal 1 (SIGHUP).
    ## If it does not support it, restart.
    $0 stop
    $0 start

    # Remember status and be quiet
    rc_status
    ;;
    reload)
    ## Like force-reload, but if daemon does not support
    ## signalling, do nothing (!)

    ## Otherwise if it does not support reload:
    rc_status -v
    ;;
    status)
    echo -n "Checking for Redmine: " 
    ## Check status with checkproc(8), if process is running
    ## checkproc will return with exit status 0.

    # Status has a slightly different for the status command:
    # 0 - service running
    # 1 - service dead, but /var/run/  pid  file exists
    # 2 - service dead, but /var/lock/ lock file exists
    # 3 - service not running

    # NOTE: checkproc returns LSB compliant status values.
    checkproc -p $PIDFILE ruby $REDMINE_BIN
    rc_status -v
    ;;
    probe)
    ## Optional: Probe for the necessity of a reload,
    ## give out the argument which is required for a reload.

    ;;
    *)
    echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload|probe}" 
    exit 1
    ;;
esac
rc_exit